Tamiya Clamp-Type Wheel Hubs for CW-01, Aluminum (2pcs) - JR-LB07-LB by Jazrider  [JR-LB07-LB]

Overview of CW-01 clamp-style wheel hubs

These two clamp-type aluminum wheel hubs are intended for Tamiya CW-01 wheel mounting and fit a range of classic 1/10 buggies such as Hornet, Grasshopper, Frog, Lunch Box and Monster Beetle. The JR-LB07-LB hubs adopt an aluminum clamp approach to produce a stable connection between the wheel and axle stub while keeping a compact profile for stock CW-01 configurations.

Compatibility is restricted to the models listed that share the CW-01 wheel mounting pattern; confirm wheel hex and axle stub dimensions before fitting. The hubs serve as direct-replacement parts to align with existing wheel hardware and mounting points rather than to modify suspension geometry.

Fitting instructions: remove the original hub, inspect axle threads and wheel hex for wear, slide the clamp hub onto the axle or hex seat, align for a flush wheel fit, then secure using the vehicle's original fasteners. Apply suitable torque for small RC fasteners and verify there is no binding or excessive runout after installation.

Adjustment notes: clamp-type aluminum hubs can help reduce deformation under load and improve repeatability when remounting wheels compared with thin pressed hubs. After fitting, check wheel balance and runout and make incremental setup changes if tyre or wheel combinations change. These items are for scale RC CW-01 based models and do not change steering or suspension geometry by themselves.