TAMIYA Compatible Front Upper Suspension Arm for TL-01 GF-01 WR-02 - TL01-13300-LB by Jazrider  [TL01-13300-LB]

Front upper arm upgrade compatible with TAMIYA TL-01/GF-01/WR-02

An RC-scale, machined aluminum front upper suspension arm designed for TAMIYA TL-01, GF-01 and WR-02 chassis. The light blue anodized coating and solid construction give a stiffer mounting point than OEM plastic arms, delivering steadier geometry under load.

Install this arm when you need more precise suspension feedback during chassis setup and tuning. It fits the standard TL-01/GF-01/WR-02 hole patterns and is intended for typical on-road and touring model maintenance workflows.

Installation and tuning notes

• Confirm alignment with original pivot and ball stud positions before torquing down.
• Apply thread locker to steel fasteners for high-load usage and inspect for any play after the initial session.
• Replacing plastic with aluminium will alter stiffness; recheck ride height and toe settings to compensate.
• Ensure mating surfaces are deburred and the suspension moves freely to avoid binding.