Tamiya DF01 Precision Front Suspension Arms (Blue) - JR-DF101-LB by Jazrider  [JR-DF101-LB]

Tamiya DF01 Top Force/ Manta Ray Aluminum Front Suspension Arms (Blue)
Price:
£9.51
Brand:
JAZRIDER
Model:
JR-DF101-LB
Condition:
Brand New
Available in shop
Write a review

Precision aluminum arms for DF01 buggies

The JR-DF101-LB front suspension arms are an aluminum upgrade designed specifically for Tamiya DF01-based models. These blue arms replace the original plastic components while keeping the DF01 geometry intact, offering a stiffer front end for more consistent steering and setup repeatability.

Fitment is a simple bolt-on swap using the DF01 mounting points and original hardware. During installation check the hinge pin alignment and ball stud positions prior to final tightening to ensure correct steering operation. Following fitment, small toe or camber corrections may be needed as part of final setup.

These arms are intended as a tuning accessory to limit front flex and to stabilise handling when modifying springs, shock positions, or caster. For 1/10 scale RC models only; not suitable for any full-size vehicle use.

Compatible Models

  • Tamiya 1/10 RC Buggy Top Force
  • Top Force Evolution
  • Manta Ray
  • Terra Conqueror
  • Blazing Star
  • Dirt Thrasher
  • DF01 Chassis
  • NOT suitable for Tamiya RC Cayenna (58406) and Racing Lancer (58421)
They are made for DF01 geometry and will fit standard DF01-based Top Force and Manta Ray variants. Confirm part clearance on uncommon or heavily modified DF01 builds before finishing the install.
Aluminum is more resistant to flex but can deform or dent under severe impact; inspect after crashes and replace if bent to maintain correct geometry.
No extra components are listed with the product. Use the original DF01 screws and pins unless replacements are required due to wear or damage.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved