Tamiya DF-02 Front Lower Arm Alloy Replacement DF2055 by GPM  [DF2055]

Tamiya DF-02 Alloy Front Lower Arm With Pins & 2.5mm E-clips & Delrin Collars & Screws - 1pr set - GPM DF2055
Price:
£17.77
Brand:
GPM
Model:
DF2055
GTIN:
4894538040180
Condition:
Brand New
Write a review

Upgrade front lower arm for DF-02 cars

This alloy front lower arm set is an aftermarket replacement intended for the Tamiya DF-02 chassis. The kit includes the arm and mounting hardware: pins, 2.5mm E-clips, Delrin collars and screws. It replaces the standard plastic lower arm as a durable RC suspension component.

Use this arm when you want a firmer front attachment or when replacing a cracked or broken plastic arm. The alloy material gives greater rigidity than stock plastic, and the supplied hardware supports installation using the original DF-02 mounting points.

Fitment notes: the part is designed as a direct-fit aftermarket arm for DF-02 layouts that share the same lower-arm geometry. During fitting confirm alignment and pin retention, press on the 2.5mm E-clips to the supplied pins and verify Delrin collars are seated to maintain correct arm preload. Standard hobby tools will cover installation and setup work.

Specifications

  • Item: Front lower arm set, 1 pr
  • Material: Alloy
  • Model Number: DF2055
  • Included: Pins, 2.5mm E-clips, Delrin collars, screws
  • Compatibility: Tamiya DF-02

For builders seeking stronger front suspension parts or who want to tune DF-02 handling with metal components, this alloy lower arm set provides a direct aftermarket replacement with the necessary mounting hardware included.

Will this part fit without chassis modification?

Yes, the arm is made to fit DF-02 lower-arm mounting geometry so no chassis modification should be necessary when the original points are intact.

Should I change suspension setup after fitting?

A setup check is advisable since the extra stiffness can change handling. Small adjustments to springs, shock oil or toe settings will help regain your preferred balance.

Is corrosion a concern for alloy arms?

Check exposed metal parts periodically and keep threads and pins clean. Use anti-seize on screws if you run in wet conditions to reduce the risk of corrosion and seizing.

What should I check after a heavy impact?

Inspect mounting points, pins and E-clips for deformation, check for hairline cracks and confirm the Delrin collars still hold preload; replace any damaged items before the next run.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved