TAMIYA DT-03 Compatible Steering Upgrade - 25T Aluminum Servo Saver & Tie Rods JR-DT309-BK by Jazrider  [JR-DT309-BK]

Jazrider Tamiya DT-03 Chassis Aluminum Hi-torque Servo Saver 25T w/Aluminum Tie Rod Set (Black)
Price:
£6.54
Brand:
JAZRIDER
Model:
JR-DT309-BK
Condition:
Brand New
Available in shop
Write a review

Compatibility and fit notes for DT-03 chassis

Specifically for the TAMIYA DT-03 platform, this upgrade swaps in an aluminum hi-torque 25T servo saver and corresponding aluminium tie rods to replace standard plastic steering parts and provide a firmer, more stable steering setup.

The saver engages a 25T spline and is positioned between the servo and steering linkage to protect the servo while improving steering feedback. Aluminum tie rods minimise flex and enable more precise control over toe and steering geometry during setup changes.

Fitment checklist: press the saver onto the 25T servo spline and secure it using the DT-03 steering mounting points, match tie rod lengths to set neutral toe, and run the steering through its full range to check for interference. Make small, incremental tie rod adjustments to tune toe or centre without affecting other suspension parameters.

Will this fit all DT-03 variants?

The kit is designed for the DT-03 steering layout. Check your chassis steering mounts and servo spline size to confirm compatibility before fitting.

Do I need a different servo horn with this saver?

The saver sits on the 25T spline; in most cases your existing servo horn will work if it matches a 25T interface, otherwise use a compatible horn or adapter.

How should I check for correct toe after installation?

Set tie rods to identical lengths, measure toe at both wheels, and make small incremental adjustments while rechecking until the desired setting is reached. Re-test full steering travel after each change.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved