TAMIYA DT-03 Front 70mm Adjustable Ball-Top Damper Set DT3070F/PBT by GPM  [DT3070F/PBT]

Tamiya DT03 Aluminium Front Adjustable Plastic ball Top 70mm Damper - 1pr set - GPM DT3070F/PBT
Price:
£13.98
Brand:
GPM
Model:
DT3070F/PBT
GTIN:
4894538052688
Condition:
Brand New
2 Reviews
Write a review
alt="Tamiya DT03 Aluminium Front Adjustable Plastic ball Top 70mm Damper - 1pr set - GPM DT3070F/PBT" title="Tamiya DT03 Aluminium Front Adjustable Plastic ball Top 70mm Damper - 1pr set - GPM DT3070F/PBT"

Front 70mm adjustable damper for DT-03 chassis

This aftermarket aluminium-front, plastic ball-top damper set is produced for use on TAMIYA DT-03 cars. The front pair replaces the stock DT-03 front dampers and provides modest adjustability of ride height and preload via the ball-top and collar arrangement.

Application note: intended as replacement front dampers for on-vehicle suspension tuning. A metal lower cap is paired with a plastic ball-top to retain DT-03 mounting points while improving seating stability under load.

Packing includes

  • Front Damper - 2pcs
  • Collar - 2pcs
  • Round Head Screw 3x16 - 2pcs
  • Round Head Screw 3x25 - 2pcs

Compatible Models

  • TAMIYA-DT-03

Recommended for modelers and tuners wanting a straightforward, direct-fit front damper option for the DT-03; confirm that your existing top mounts and hardware are compatible prior to final assembly.

 

Product Reviews
2 Reviews
rating
I bought several parts off you guys for a few different Tamiya chassis. Love the quality of your products. Can I ask why you do not have any parts for the Tamiya CR-01 chassis?
rating
Thank you very much, all arrived safely. Thank you very much for this first transaction from Japan to my beautiful France. Good luck and thank you again from the bottom of my heart. See you next time and good luck in the land of the rising sun. ++++

What is included in the package?

The package contains two front dampers, two collars and two pairs of round head screws (3x16 and 3x25) for mounting.

Is this suitable for competition use?

These are basic adjustable units intended for setup and tuning rather than high-end competition damping; they are useful for weekend racing and club use where simple adjustments suffice.

Will they fit aftermarket top mounts?

They maintain DT-03 mounting geometry but you should check clearances with any non-stock top mounts before final tightening to avoid interference.

How does the metal lower cap change performance?

The metal lower cap is stiffer than typical plastic caps and helps keep the joint seating consistent under load, which can deliver more predictable front-end behaviour during runs.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved