Tamiya DT-03 Front Shock Tower DT3028 Aluminium Tuning Part by GPM  [DT3028]

Front shock tower in aluminium for DT-03

This aluminium front shock tower is a direct replacement for the Tamiya DT-03 chassis and serves as the mounting location for the front shocks during setup adjustments. It enables changes to suspension geometry without permanent modifications to the chassis.

Intended for hobby-scale RC use, the aluminium tower provides a firmer mounting platform than plastic, improving consistency when setting camber and ride height. Installation uses the same DT-03 mounting points and typically reuses the original hardware.

During setup, small changes at the tower alter lever arms and shock angles and will influence front-end behaviour. Ensure fasteners are properly tightened and check alignment after initial test runs to confirm settings are stable.