TAMIYA DT-03 Machined Front Shock Tower JR-DT302-GR by Jazrider  [JR-DT302-GR]

Tamiya DT-03 Aluminum Front Shock Tower (Green)
Price:
£7.28
Brand:
JAZRIDER
Model:
JR-DT302-GR
Condition:
Brand New
Available in shop
Write a review

Shock tower description and fit

This machined aluminium front shock tower is supplied by JAZRIDER for the TAMIYA DT-03 chassis and is finished in green. It is intended as an RC-scale replacement to provide a firmer mounting location for the front suspension and to hold shock positions steady during setup and track testing.

Its primary function is to anchor the top of the front shocks and deliver a consistent platform when changing mounting holes or testing different spring and damper setups. The use of metal increases stiffness at the mounting area relative to plastic parts, which can influence handling characteristics and tuning feedback.

Installation notes: the part is produced to align with DT-03 front tower mounting points so it should fit in place of the stock tower. Check that holes line up and reuse the chassis fasteners where suitable or obtain matching screws as needed. Inspect clearances around the servo, steering links and ESC to prevent any interference after installation.

Does this part fit the DT-03 without modification?

The tower is designed for DT-03 compatibility and typically installs without modification; confirm the mounting hole pattern matches your chassis before final assembly.

Will the aluminium tower affect crash durability?

Aluminium improves stiffness but can transfer impact loads differently compared with plastic, which may protect some components while transferring force to others; consider this when assessing durability for your use.

Any setup checks after installing the tower?

After fitting, re-check shock alignment, ride height and steering geometry, as the altered mounting stiffness can change the baseline handling and may require small setup tweaks.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved