TAMIYA DT-04 Precision Rear Hub Stub Carriers 7075-T6 Oversized Bearings DT4022 by GPM  [DT4022]

TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022
Price:
£12.50
Brand:
GPM
Model:
DT4022
GTIN:
4894538407136
Condition:
Brand New
Write a review
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"

Precision rear hub carriers for DT-04

This aftermarket set replaces the standard rear hub stub carriers on TAMIYA DT-04 RC FIGHTER NXGEN chassis with 7075-T6 aluminium pieces machined to accept oversized bearings, reducing play and improving rear steering accuracy on 1/10 scale cars.

The anodized carriers use oversize bearings to improve bearing alignment and durability compared with factory inserts. Small fixings arrive pre-assembled to make installation faster for the workshop or trackside maintenance.

Installation summary: remove the original carriers, move across any seals or spacers required, install the provided oversized bearings with stainless washers, and secure the assembly with medium-strength thread locker to keep fasteners tight under use.

Packing includes

  • Rear Hub Stub Carriers - 2pcs
  • Oversized Bearing 5x13x5 - 2pcs
  • Oversized Bearing 5x12x4 - 2pcs
  • Stainless Steel Washer 5x8x0.5 - 4pcs

Compatible Models

  • TAMIYA 1/10 DT-04 RC FIGHTER NXGEN-58741

A direct, no-geometry-change upgrade focused on strong hub support and improved bearing seating to deliver a firmer, more controllable rear-end feel.

Do these carriers come with different finish choices?

Yes, the carriers are anodized and typically offered in a selection of finishes; check the product listing for available colours.

Is bearing preload affected by using oversized bearings?

Oversized bearings change bearing seating and can improve rigidity; follow installation steps and check axle runout and preload during assembly.

Will these increase wear on other components?

When fitted correctly, these carriers reduce unwanted movement and should not increase wear on suspension components; ensure bearings are lubricated and seals are intact.

Can I run these carriers on wet tracks?

Use appropriate sealed bearings and inspect for water ingress after running in wet conditions; stainless washers help resist corrosion but care is still advised.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved