Tamiya F104 Front-End Suspension Replacement - F104-17 by 3Racing  [F104-17]

F104 Front-End Suspension Replacement

This front suspension set is an aftermarket hop-up intended for the Tamiya F104 chassis and is listed as part no. F104-17. The overview covers fitment, installation pointers, and the role of the assembly in front-end tuning without asserting unverified construction details.

Compatibility summary: the assembly is made to work with the standard Tamiya F104 front mounting points and steering geometry. When replacing the original front assembly, confirm steering knuckles, hubs, and any bearings or rods you plan to reuse conform to the F104 layout before final assembly.

Installation notes: mount the set to the F104 front bulkhead and integrate it with the existing steering assembly; remove stock parts and transfer serviceable items such as turnbuckles and bearings as required. Follow the chassis manual for torque recommendations and alignment to avoid over-tightening and to retain the intended range of movement.

Setup considerations: use this front suspension set as a modular element when adjusting steering geometry and suspension behaviour. It supports front-end tuning during changes to shock length, spring rates, or anti-roll bar settings on a 1/10 on-road F104 platform and will influence turn-in, mid-corner balance, and front axle weight transfer.