TAMIYA Ford Aeromax Alloy Front Bumper Assembly TRU331F by GPM  [TRU331F]

Tractor Truck (Ford Aeromax) Alloy Front Bumper With Mount & Screws For Ford Aeromax - 1set - GPM TRU331F
Price:
£39.86
Brand:
GPM
Model:
TRU331F
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Alloy bumper assembly for Ford Aeromax

This RC-scale alloy front bumper kit is intended for the TAMIYA Tractor Truck Ford Aeromax platform. The set contains a machined alloy bumper plus the corresponding mount hardware and screws supplied together, designed to replace the factory plastic front bumper on compatible truck models.

Used for model repairs and tuning, the alloy component provides a stiffer front-end anchor that can affect chassis response and increase impact robustness. The supplied mount and screws match the bumper for straightforward installation with typical hobby tools.

Fitting guidance: carry out a trial assembly before final tightening, ensure proper thread engagement for existing holes, and check for body and linkage clearance during mock fitting. This product is an accessory for RC models only and is not suitable for real vehicles.

Specifications

  • Item: Alloy front bumper with mount and screws
  • Material: Alloy
  • Model Number: TRU331F
  • Compatibility: Ford Aeromax Tractor Truck

Opt for this alloy bumper when you need a resilient replacement or to firm up the front-end for tuning on the Ford Aeromax Tractor Truck; always check fit and clearances before final use.

Will this fit without drilling?

Most installations use the existing mounting points and do not require drilling, but verify the bracket lines up with your chassis before tightening the screws.

What material properties should I expect?

The alloy bumper offers greater stiffness and wear resistance compared with standard plastic parts; however, inspect attachment points after heavy impacts.

Can I use standard screws from my tool kit?

The kit includes appropriate screws, but if replacing them use equivalent thread size and length to maintain correct engagement and avoid stripping threads.

How do I confirm steering clearance?

After test-fitting the bumper, cycle the steering through full lock to check for any rubbing against the body shell or the bumper itself, and adjust as needed.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved