Tamiya Honda City Turbo WR02C Front C-Hub WRC2020 Aluminium by GPM  [WRC2020]

Front C-Hub Upgrade for WR02C

This aluminium front C-hub is an aftermarket replacement built for the Tamiya Honda City Turbo WR02C chassis. It acts as the front steering knuckle interface, offering a solid mounting point for the hub carrier and steering linkage while preserving the original WR02C suspension geometry.

Delivered as a 1pr set, the part replaces the stock plastic hubs with minimal changes to existing hardware. Most builds retain wheel bearings and hub pins, changing only the hubs to alter steering rigidity and feel. This is a model-scale component and not a real-vehicle part.

During tuning aluminium hubs are used to reduce deflection under load compared with plastic parts, often leading to crisper steering and more repeatable feedback when cornering hard. After fitting check steering rod alignment, servo horn clearance, and wheel bearing rotation.

Select these aluminium C-hubs to stiffen the steering interface for tuning or to replace worn plastic parts; confirm all clearances after installation.