Tamiya M06 Aluminium C-Hub Replacement 1pr M6020 by GPM  [M6020]

Tamiya M06 Aluminium C-Hub - 1pr set - GPM M6020
Price:
£8.73
Brand:
GPM
Model:
M6020
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Front C-hub in aluminium for M06

The M6020 is an aluminium aftermarket C-hub made for the Tamiya M06 chassis and supplied as a pair. It replaces the factory plastic part and is designed to interface with the front suspension and steering components of M06 models.

Tuning impact: the C-hub locates the steering knuckle and affects spindle offset and scrub radius. Many hobbyists fit aluminium hubs to reduce flex and gain more consistent steering behaviour compared with standard plastic units.

Installation guidance: confirm orientation and test-fit against the lower arm and knuckle before tightening, start screws by hand then torque in sequence to prevent binding, and verify full steering travel and clearance prior to driving. Recheck fasteners after initial usage.

Is this suitable for competition use?

It is an aluminium replacement intended to improve repeatability; suitability for competition depends on your class rules and setup choices.

Will my existing screws fit?

Check the screw lengths and thread types against your current hardware; some setups may require different fasteners for correct seating.

Can this change wheel alignment?

Changing to an aluminium C-hub can alter alignment characteristics by changing flex and geometric repeatability, so recheck toe and camber after fitting.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved