TAMIYA T3-01 DANCING RIDER Adjustable Alloy Rear Sway Arm T3332R by GPM  [T3332R]

Component overview and benefits

This aftermarket rear sway arm is a scale replacement and tuning component for the TAMIYA T3-01 DANCING RIDER chassis, identified as model T3332R. It serves as a direct swap for the stock rear sway arm to give a lighter, stiffer link and to let you alter roll characteristics using multiple ball end positions.

The part is machined from aluminum 6061 T6 and includes stainless steel flat head screws, washers, copper bead and white silicone rings to manage play on the screw shafts. Ball connectors at both ends are adjustable; positioning them further out increases lean angle and modifies roll transfer between axles, enabling finer cornering balance without changing suspension geometry.

Fitment uses the supplied hardware and follows standard T3-01 linkage points while retaining common ball stud interfaces. The silicone rings act as simple shims to minimise axial play while maintaining the small articulation needed for natural suspension response.

Choose this arm to achieve a more controllable lean angle and improved roll response on the T3-01; tweak the ball ends in small steps and re-evaluate handling after each change.