Tamiya T3-01 Internal Ratio Upgrade Gear Set by Factory Pro O-AP0004  [FP-O-AP0004]

Factory Pro FP-O-AP0004 Faster Internal Gear Ratio Gear Set (for Tamiya T3-01)
Price:
£24.41
Brand:
Factory Pro
Model:
FP-O-AP0004
Condition:
Brand New
Write a review

Aftermarket internal ratio upgrade

The Factory Pro O-AP0004 kit is an internal gear ratio upgrade intended for the Tamiya T3-01 platform. It alters internal gear relationships inside the gearbox so operators can refine throttle behaviour and enhance low speed acceleration without altering external pinion or spur sizes.

Installation mirrors standard T3-01 gearbox maintenance: separate the transmission case, extract the stock internal gears, install the supplied gear set, verify correct gear mesh and endplay, and reassemble while checking bearings and shims. The kit is a tuning component rather than an external transmission replacement.

Specifications

  • Item: Internal gear ratio gear set
  • Material: Not specified
  • Model Number: O-AP0004
  • Compatibility: Tamiya T3-01

Supported Chassis

  • Tamiya T3-01

For those seeking a drivetrain-level tuning option for the T3-01, the Factory Pro O-AP0004 set provides a straightforward internal swap to change ratio characteristics; always confirm fit and bearing condition for reliable performance.

It is designed for the standard Tamiya T3-01 internal gearbox layout. If your model has non standard internals check clearances prior to fitting.
Yes, the internal ratio change alters throttle response and low speed traction often without the need for a different motor.
Inspect existing bearings; if they show wear or play it is prudent to replace them to ensure correct mesh and long service life.
With the gearbox half assembled, rotate the gear train while gauging axial movement and adjust shims until recommended endplay and gear mesh are achieved.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved