Tamiya TA01/TA02 Rear Shock Mount (Aluminum) JR-TA105-LB by Jazrider  [JR-TA105-LB]

Tamiya TA01 / TA02 Aluminum Rear Shock Tower (Light Blue)
Price:
£7.60
Brand:
JAZRIDER
Model:
JR-TA105-LB
Condition:
Brand New
Available in shop
Write a review

Rear Shock Tower Fit Guide for TA01/TA02

This aluminum rear shock tower is a direct-fit upgrade for Tamiya TA01 and TA02 1/10 touring car chassis. As a machined alloy item it keeps the original mounting geometry while supplying a firmer mounting location for rear shocks.

Installation uses the factory rear bulkhead and the same shock mounting points found on TA01/TA02 chassis, so stock hole patterns are preserved. During fitment check eyelet spacing and screw lengths and reuse the original screws if they produce secure thread engagement.

Functionally the stiffer tower reduces flex at the shock top compared with plastic parts, which helps keep shock geometry stable and repeatable when refining rear-end balance. The light blue finish is decorative and does not change how the part fits.

Which hole pattern does this use on the chassis?

The JR-TA105-LB matches the factory rear shock mounting pattern for TA01 and TA02, so it attaches in the same positions as the original tower.

Will this change shock geometry or ride height?

No. The tower preserves mounting dimensions and hole locations, so it does not alter nominal shock geometry or ride height; it only reduces flex at the attachment point.

What fasteners are recommended during installation?

Use the original screws where they provide full engagement; if replacement is required choose screws of the same thread and appropriate length to avoid bottoming out or leaving insufficient thread engagement.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved