TA05 Front SSG Graphite Shock Mount TA05-02/SG by 3Racing  [TA05-02/SG]

Tamiya TA05 Front SSG Graphite Shock Tower - 3Racing TA05-02/SG
Price:
£8.93
Brand:
3Racing
Model:
TA05-02/SG
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Front SSG Graphite Tower Brief

This graphite front SSG shock tower is produced for use on the TAMIYA TA05 chassis and carries the model code TA05-02/SG. It replaces the standard front shock plate to deliver a firmer, more consistent mounting point for the front dampers.

The component is intended as a suspension mounting and tuning accessory. Installing it changes mounting stiffness and can alter shock leverage and chassis response; treat it as a handling refinement rather than an instant performance upgrade. Whenever possible reuse original fasteners and verify alignment before final tightening.

Fitting guidance: remove the stock front tower and transfer any spacers or mounts required. Reassess shock angles and droop after installation and test in controlled runs to compare handling. Small shifts in mounting positions or tower height will influence front grip and overall balance, so make adjustments gradually.

Will this work on every TA05?

The tower is for the TA05 front SSG location; confirm your chassis variant and fitment points prior to purchase to avoid mismatch.

Do I need to replace springs or shocks?

Not usually. The tower changes mounting stiffness rather than shock internals, though you may want to reassess spring rates and damping to suit the new mount behaviour.

How to fine tune after fitting?

Start with small changes to shock positions and rebound, then run laps to evaluate front bite and steering feel. Make incremental tweaks until balance and feedback meet your driving style.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved