This aluminium C-hub replaces the standard plastic steering hub on TB04 chassis. Machined to tight tolerances, it provides a stiffer mounting surface for steering linkages and suspension pivots used in 1/10 touring car rigs.
Installation is aimed at hobbyists confident with TB04 disassembly: remove the original hub, move over compatible pins or bearings, and secure the aluminium component with the original screws. Basic hex drivers are normally sufficient, but always confirm steering free-play and geometry after mounting.
When tuning, an aluminium C-hub reduces flex at the steering pivot and delivers consistent contact for pins and bearings, which tends to sharpen steering feedback and make setup changes more predictable. Only use this accessory on TB04-compatible models.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved
