Tamiya TRF 415 Precision 1A Ver.2 Aluminium Suspension Mount 415-01/1A/V2 by 3Racing  [415-01/1A/V2]

Precision 1A Ver.2 mount for TRF 415 chassis

This item is an aluminium 1A Ver.2 suspension mount intended as a direct replacement for the Tamiya TRF 415 pickup location, referenced by model 415-01/1A/V2. It provides a firmer mounting surface to support consistent suspension geometry during tuning.

In use the mount replaces the factory suspension link attachment on the TRF 415 and interfaces with the existing suspension arms and fasteners. The stiffer material reduces compliance at the pivot and helps maintain setup settings under load.

Fitting is conventional: remove the original 1A part, match the replacement to the chassis mounting points and tighten with the stock screws or proper equivalents. After install confirm wheel alignment and suspension range before track testing.

Tuning guidance: aluminium at the pickup point alters local stiffness and can change initial turn-in and mid-corner balance. Make measured adjustments to shock and anti-roll configuration to dial in the chassis.