Tamiya TRF421X 2.25 Graphite Main Chassis O-TCP009 Compatible Upgrade by Factory Pro  [FP-O-TCP009]

Factory Pro FP-O-TCP009 Tamiya TRF421X - Main Chassis - Graphite 2.25
Price:
£34.25
Brand:
Factory Pro
Model:
FP-O-TCP009
Condition:
Brand New
Write a review

Detailed Fitment and Use Notes

The Factory Pro O-TCP009 is an aftermarket graphite main chassis created for the Tamiya TRF421X platform. It functions as a direct-fit graphite plate replacement that retains the mounting pattern used on TRF421X models.

Designed to support setup refinement, this graphite main chassis will alter flex characteristics and vehicle feedback as you change suspension settings. Prior to final assembly, check that all mounting holes align with your TRF421X components and that original mounting hardware is suitable for reuse. Also confirm clearance around the motor mount, gearbox and bulkheads.

Specifications

  • Item Main Chassis
  • Material Graphite
  • Model Number O-TCP009
  • Compatibility Tamiya TRF421X
  • Size 2.25

Install the Factory Pro graphite main chassis O-TCP009 when you need a precise TRF421X replacement or when experimenting with chassis flex is part of your development plan; always confirm fitment and torque values to protect drivetrain alignment.

Does this plate replace the original TRF421X chassis without modifications?

The O-TCP009 is manufactured to match TRF421X mounting layouts, but always trial-fit and inspect for any slight variances before finalising installation to prevent interference with components.

Should I change screw lengths when swapping plates?

Confirm screw engagement depth and replace any worn or incorrect-length fasteners; proper screw selection prevents clamping stress and reduces the risk of graphite fractures.

How precise must the hole alignment be for safe use?

Alignment should be exact; misaligned holes can induce uneven loads and lead to fatigue. If alignment is off, address it before running the car to avoid damage.

Can I re-use spacers and standoffs from my original chassis?

Yes, re-use spacers and standoffs if they are in good condition and fit flush. Replace any components that show wear to ensure proper support for the graphite plate.

What checks should I perform after the first test run?

After a short run, re-check all screw torques, inspect for new surface marks or stresses, and verify that drivetrain clearances remain consistent.

Is this part compatible with TRF421 variants that use different gearboxes?

This chassis is specified for the TRF421X. If your variant uses a different gearbox or mounting arrangement, confirm compatibility before attempting to fit the O-TCP009.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved