Tamiya TT01 Family Precision Aluminum Rear Hub JR-TT102-LB by Jazrider  [JR-TT102-LB]

Tamiya TT01 / TT01E / TT01ED Aluminum Rear Hub/Knuckle Arm (Light Blue)
Price:
£7.80
Brand:
JAZRIDER
Model:
JR-TT102-LB
Condition:
Brand New
Available in shop
Write a review

Aluminium rear hub for Tamiya TT01 models

The JR-TT102-LB serves as an aluminium rear hub / knuckle arm for Tamiya TT01, TT01E and TT01ED chassis in RC use. The light blue anodised piece replaces the original plastic knuckle to increase rigidity and reduce wear at the steering and suspension interface.

It is supplied to mount using the original chassis points and fasteners and retains the stock geometry so toe and camber settings do not change when the unit is fitted. This lets drivers keep the established handling baseline while moving to a metal rear hub.

Practical notes: aluminium hubs cut down wheel-end compliance, which can make rear suspension feedback more consistent and steering more immediate. Always check bearings, mating surfaces and secure screws with thread-lock during fitting and servicing.

Are there any compatibility caveats with different TT01 variants?

The hub is designed for TT01, TT01E and TT01ED platforms and uses the original mount points; confirm your variant uses the same knuckle attachment before fitting.

Should I recheck setup after swapping hubs?

Yes. Although geometry is maintained, it is good practice to recheck toe and camber and make minor setup adjustments after installing a stiffer hub to balance handling.

Will this part affect crash behaviour?

The aluminium hub resists wear better than plastic but can transfer more force to surrounding components in a heavy impact; inspect the suspension and mounting hardware after any significant crash.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved