TAMIYA TT01 Heavy-Duty Style Front Bumper Alloy 3mm TT220 by GPM  [TT220]

Tamiya TT01 /Tt-01d Alloy Front Bumper Thick 3mm With Screws - GPM TT220
Price:
£3.40
Brand:
GPM
Model:
TT220
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya TT01 /Tt-01d Alloy Front Bumper Thick 3mm With Screws - GPM TT220" title="Tamiya TT01 /Tt-01d Alloy Front Bumper Thick 3mm With Screws - GPM TT220"

Replacement alloy bumper for TT01 front mounts

This 3mm alloy front bumper is an aftermarket replacement compatible with TAMIYA TT01 and TT-01d chassis and is supplied with the required screws. It fits the standard front mounting points to restore chassis stiffness and provide limited protection from light on-road impacts.

The thicker alloy reduces front flex under braking and corner loads, which can subtly influence steering feedback and handling balance on tuned TT01 cars. It is intended for tuning and repair rather than full-contact collision protection or off-label uses.

Fitment advice: the bumper uses TT01 front mounting locations and includes mounting screws. Confirm alignment and check clearances with your current front mounts before final tightening to avoid chassis binding.

Will this fit my TT01 without modification?

It is designed for standard TT01 and TT-01d mounting patterns. Inspect your chassis to ensure it uses stock front mount holes before purchasing.

Are mounting fixings supplied?

Yes, mounting screws are included to attach the bumper to the TT01 front mounts.

Should I expect major handling changes?

Handling changes are typically modest; the stiffer front can affect turn-in and steering feel so test and adjust your setup if necessary.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved