TAMIYA TT-02 Machined 12mm Hex Wheel Hub Adapter - TT02-13123-RD TT02-131 by Jazrider  [TT02-13123-RD]

Tamiya TT-02 Aluminum 12mm Wheel Hex Hubs Adapter (Red)
Price:
£4.91
Brand:
JAZRIDER
Model:
TT02-13123-RD
Condition:
Brand New
Available in shop
Write a review

Machined 12mm Hex Wheel Hub Adapter - Red

This aluminum 12mm wheel hex hub adapter is supplied for the TAMIYA TT-02 chassis and works as a replacement for the stock plastic hexes. With a machined profile and red anodized finish, it is aimed at improving wheel seating and limiting play for steadier handling.

The adapter is a direct wheel mount for TT-02 wheels that accept a 12mm hex, helping to maintain wheel alignment during dynamic loads. It is marketed as a tuning upgrade that enhances repeatability without changing the suspension geometry.

Fitting is done on standard TT-02 hubs and uses the vehicle's existing wheel mounting hardware; no drivetrain modifications are typically necessary. After installation, confirm clearance around nearby components and re-check wheel balance to prevent unwanted vibration.

Will this adapter fit aftermarket wheels that use a 12mm hex?

It fits wheels that use the same 12mm hex standard; confirm the wheel's hex profile and thickness to ensure correct seating and clearance before final installation.

Is the adapter compatible with different TT-02 variants?

The adapter is specified for TT-02 wheel systems using a 12mm hex. Variants that retain the same hub and hex dimensions should be compatible, but always verify hub dimensions on modified or specialty TT-02 versions.

Any special fitment notes to watch for?

Check for adequate clearance with brakes, driveshafts, and bodywork after fitting. Re-torque wheel fasteners and run a short test to ensure no rubbing or vibration occurs.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved