Tamiya TT02 Precision Alloy Front Knuckle Arm TT2021B by GPM  [TT2021B]

Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B
Price:
£14.79
Brand:
GPM
Model:
TT2021B
GTIN:
4894538214840
Condition:
Brand New
Write a review
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"
alt="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B" title="Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set - GPM TT2021B"

Precision alloy knuckle for TT02

The TT2021B alloy front knuckle arm is an aftermarket steering hub built for the Tamiya TT02 chassis. It replaces the stock nylon knuckle with a metal component that accepts a ball bearing at the steering pivot. The unit is supplied as a 1pr set and is intended for hobbyists carrying out tuning or maintenance.

During installation retain the specified original nylon piece as directed. Check steering linkage alignment and confirm the bearing is correctly seated so the pivot rotates freely without binding. Reuse existing TT02 hardware and follow recommended torque settings for secure assembly.

Functionally this alloy knuckle increases stiffness over a stock nylon part and situates a bearing at the pivot to reduce friction and wear. Expect improved steering response and longer component life when used with a properly maintained steering system; make setup changes incrementally when tuning handling.

Specifications

  • Item: Tamiya TT02 Alloy Front Knuckle Arm With Bearing - 1pr set
  • Material: Alloy
  • Model Number: TT2021B
  • Compatibility: Tamiya TT02

Fit this alloy knuckle to firm the front end and lower pivot drag, ensuring you keep the specified original nylon elements for correct fitment.

Will this part affect servo load?

The alloy knuckle can change steering feel and stiffness but should not add unacceptable load if installed correctly; check servo torque and trim after fitting.

Can I use it on both touring and off-road TT02 setups?

The knuckle is a general tuning upgrade for TT02 platforms; suitability depends on your suspension and tyre choices, so test changes on your intended running surface.

What checks should I do after installation?

After fitting, verify steering alignment, confirm free pivot rotation, and perform a short test drive to detect any binding or play before extended running.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved