TAMIYA XV-01 Aluminum Steering C Hub Black XV01-13401-BK by Jazrider  [XV01-13401-BK]

Tamiya XV-01 Aluminum C Hub (Black) DB01/DB02/TRF502X/TRF503
Price:
£6.91
Brand:
JAZRIDER
Model:
XV01-13401-BK
Condition:
Brand New
Write a review

Black C Hub for XV-01 Series

The XV01-13401-BK aluminum C hub is an aftermarket part for TAMIYA XV-01 derived chassis where a stiffer steering pivot is required. As a direct-fit hop-up it replaces the factory plastic C hub on compatible Tamiya platforms to adjust steering feel and enhance alignment stability.

Because aluminum alters the pivot flex, fitting this hub will change front-end response and may require toe or trim adjustments. During installation check the wheel hub, bearings and clearances, and ensure smooth rotation before competitive use.

Compatibility

  • XV-01
  • DB01
  • DB02
  • TRF502X
  • TRF503

Is this hub suitable for TRF502X and TRF503 models?

Yes, it lists TRF502X and TRF503 among compatible platforms; still confirm the mating geometry with your existing hub and wheel parts before finishing the fit.

Will I need to retune alignment after fitting?

Generally yes — reduced pivot flex changes steering characteristics, so check toe and perform measured test runs to adjust settings as required.

Any checklist before first run?

Confirm bearing seating and clearance, verify wheel spin by hand, tighten fasteners to correct torque, and perform low-speed shakedowns to confirm handling before hard use.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved