TEAM LOSI MINI-T 2.0 16T Replacement Pinion LM016T by GPM  [LM016T]

TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T
Price:
£3.67
Brand:
GPM
Model:
LM016T
GTIN:
4894538350067
Condition:
Brand New
1 Reviews
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"

16T hardened motor pinion for Mini-T 2.0

The LM016T is a no-nonsense replacement pinion intended for MINI-T 2.0 2WD vehicles that use a 16-tooth motor gear. Constructed from hardened 45# steel, it aims to deliver consistent tooth engagement and good wear life in small-scale drivetrains.

Fit details: the pinion has a 2mm centre bore and a 0.5mm tooth pitch. Confirm your motor shaft diameter and spur pitch match these measurements before fitting to ensure correct operation.

Practical fitting tips: clean the motor shaft, check for any bend or wobble, fit the pinion with the supplied 3x3 screw shaft, then adjust motor position so the mesh shows a light, even contact pattern. Run at low throttle initially and then recheck fastener tightness.

Packing includes

  • Pinion gear - 1 pcs
  • 3x3 screw shaft - 1 pcs

Compatible Models

  • TEAM LOSI MINI-T 2.0 2WD

 

Product Reviews
1 Reviews
rating
I am very satisfied with their library of parts, I have at least one GPM piece in every RC car I own, wish they could include logo stickers so I can put them on my RC car bodies though. Only thing thats a bother is the shipping times but its not a big dea

Does the pinion fit brushless motors?

Yes, it will fit brushless or brushed motors that use a 2mm shaft and a 0.5mm pitch spur, subject to physical space and motor mount compatibility.

How should I check gear mesh after installation?

With the wheel off the ground, rotate the drivetrain slowly and observe the tooth contact; aim for a small, even pattern across the tooth face and listen for any grinding.

Is this suitable for competition use?

The hardened 45# steel construction provides good durability for club-level racing, but always verify pitch and shaft fit for your exact setup before competitive runs.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved