This two piece set supplies replacement front shock springs for Team Losi SUPER BAJA front shocks with a 132mm overall length, catalogued as SB132F/SP. The springs use a 2.5mm coil wire dimension shown in the part reference and function as direct spares for the front shock assemblies.
Installation follows the standard procedure: remove the shock cap and piston if necessary, extract the old spring, then fit the new spring making sure it seats correctly on the lower spring perch. Begin with the original preload collar position and make incremental adjustments to refine ride height and initial compliance.
Setup advice: fitting a different coil thickness alters the initial spring rate and changes how the suspension copes with small bumps, steering entry and braking. Combine spring changes with damper valving and preload tuning to find a balanced front-end setup.
Checks before purchase: confirm your shocks are 132mm and measure the inner spring diameter on your current setup. Replace springs in matched pairs to ensure symmetric front axle behaviour.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved