TEAMPOWERS TP-PG6437 37T 64P Hard-Coated Pinion Gear  [TP-PG6437]

TEAMPOWERS Hard-Coated 64P Pinion Gear , 37T (TP-PG6437)
Price:
£4.11
Brand:
Team Powers
Model:
TP-PG6437
Condition:
Brand New
Write a review

High-Precision 64P Pinion for Smooth Meshing

Built for tuners and competitors, this hard-coated 64P 37T pinion focuses on reliable tooth contact and extended durability. Precision cutting reduces backlash and promotes stable driveline behaviour under load.

Why Hard Coating Matters

The hard finish strengthens the tooth surface against scuffing and micro-chipping, which is useful for frequent track sessions. A cleaner surface profile also helps lower rolling resistance between pinion and spur.

Fitment Notes

This 64 pitch, 37-tooth pinion is compatible with a large range of 1/10 electric cars. Always check motor shaft specs and torque the set screw correctly to avoid slippage during spirited driving.

How do I confirm the pinion pitch matches my spur?

Verify both parts are specified as 64 pitch; mismatched pitch will cause poor mesh and accelerated wear. Match pitch first, then set correct tooth engagement.

Is this pinion good for frequent track use?

Yes, the hard-coated finish helps maintain tooth integrity during repeated sessions, though regular inspection and cleaning are recommended.

What maintenance should I perform after a run?

Clean off debris, check mesh and set screw, and apply light lubrication if needed to reduce wear and noise.

Can I pair this with various spur tooth counts?

Yes, it will work with different spur counts as long as the spur is 64 pitch; changing spur tooth count lets you fine tune acceleration versus top speed.

Any tips for avoiding pinion damage?

Keep mesh correct, avoid overloading the drivetrain, and clean grit away after off road use to limit abrasive wear on the coating.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved