Titanium NUT M4 With Serrated Flange HUDY 296542-K Black (4)  [HSP-296542-K]

HUDY 296542-K - Titanium NUT M4 With Serrated Flange - Black (4)
Price:
£19.30
Brand:
HUDY
Model:
HSP-296542-K
Condition:
Brand New
Write a review
alt="HUDY 296542-K - Titanium NUT M4 With Serrated Flange - Black (4)" title="HUDY 296542-K - Titanium NUT M4 With Serrated Flange - Black (4)"

Precision M4 wheel nut for RC hubs

The HUDY 296542-K wheel nut is a precision titanium fastener with a serrated flange that increases contact against the hub face to help resist vibration-related loosening. Its corrosion-resistant properties make it suitable for routine outdoor and track use.

Install on M4 studs by hand-threading the nut until the flange seats, then use the correct hex tool to tighten without excess torque. The serrations assist wheel retention under load, offering confidence during spirited running.

Available as a set of 4 pieces, the nuts are intended for M4-threaded wheel studs; always verify compatibility with your wheel and hub hardware prior to use.

Specifications

  • Item: Titanium NUT M4 With Serrated Flange - Black (4)
  • Material: Titanium
  • Model Number: 296542-K
  • Compatibility: R/C wheel hubs and wheel studs with M4 threads

Use these nuts where secure M4-thread fastening and corrosion resistance are required, and follow your chassis maker's instructions for correct tightening and inspection schedules.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which wheel studs work with these nuts?

They are compatible with wheel studs that use M4 threads; confirm your vehicle uses M4-threaded studs before fitting.

Can these be used on both front and rear hubs?

Yes, provided the hubs use M4 studs, these nuts can be used on any wheel position; ensure correct fit and torque at each location.

Are individual replacements available if I lose one?

Replacement availability varies by retailer; check with your supplier for single-item or multi-pack options.

How often should I inspect these nuts?

Regular inspection after each running session is advised: check seating, serration condition, and thread integrity, and re-tighten as required following your chassis manufacturer's care guidelines.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved