TOYOTA LAND CRUISER 60 Replacement Shell for Custom Finishes - Kyosho CLB002  [KY-CLB002]

Kyosho CLB002 - TOYOTA LAND CRUISER 60 Body Type2 Non-Decoration Body Set
Price:
£78.32
Brand:
Kyosho
Model:
KY-CLB002
GTIN:
4548565523177
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Kyosho - KC10 Chassis category
Write a review

Aftermarket replacement shell for Land Cruiser 60

This Kyosho CLB002 body set is an un-decorated replacement shell made for 1/10-scale TOYOTA LAND CRUISER 60 RC models. It provides a clean, unpainted platform so enthusiasts can cut, mount, and paint the shell to achieve a personalised scale appearance.

The supply focuses on accurate fit rather than included trim pieces; paint, decals, and mounting hardware are not part of the package. Installation generally involves trimming around the wheel arches, locating mount points on the chassis posts, and checking for contact with servos, motors, and suspension parts.

Because the body influences the model's balance and running weight distribution, confirm tyre clearance and steering geometry during trial fittings. Use removable masking tape to hold the shell while you refine trim lines and mounting locations prior to final finishing.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the shell change handling or balance?

The added body weight and its placement can affect small changes in weight distribution; perform dry fits and adjust component placement if precise balance is required.

Can I install lights and trim without major modification?

Many lighting kits can be fitted, but you may need to drill mounting holes or make small cuts for wiring runs depending on the kit design.

What preparation is recommended before spraying paint?

Clean the shell with isopropyl alcohol, test-fit and mask mounting points, then apply thin, even coats of paint designed for polycarbonate or the body material used.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved