TP-Radon-SW-80 Brushless Sensor Lead 80mm - Team Powers  [TP-Radon-SW-80]

Team Powers TP-Radon-SW-80 Radon Series Signal wire (80mm)
Price:
£3.26
Brand:
Team Powers
Model:
TP-Radon-SW-80
Condition:
Brand New
Write a review

Sensor Lead Description: TP-Radon-SW-80

The Radon Series TP-Radon-SW-80 is a compact sensor signal wire intended for sensored brushless motor and ESC linkups in RC models. At 80mm it matches typical routing distances without introducing unnecessary cable.

When fitting, follow your chassis harness routes, keep the sensor lead clear of main power lines, and secure it with heatshrink or small ties where space is tight. If a solder joint is required, ensure insulation and add strain relief after joining; alternatively use an appropriate connector for easier servicing.

Reliable sensor feedback depends on short, direct wiring, correct pin orientation, and avoiding sharp bends at connection points. Firm routing and secure fixation reduce the chance of signal dropout during operation.

Will the TP-Radon-SW-80 work with all sensored brushless motors?

It is a generic sensor lead intended for sensored brushless motors; confirm your motor and ESC sensor pin types and lengths before fitting to ensure compatibility.

Can I extend the 80mm length if needed?

Extensions are possible but keep additional length to a minimum and use good-quality wiring and connectors to avoid adding noise or signal loss.

How should I secure the cable to avoid stress at the joints?

Anchor the lead along the chassis with ties or adhesive mounts, and add heatshrink over soldered areas to provide strain relief and protect the connection.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved