This aluminium front bumper serves as a scale replacement for the TAMIYA tractor truck models listed in the title. With a machined aluminium construction, the part offers a rigid mounting face and added protection for the model's front end during light impacts incurred on the trail or at shows.
The kit arrives with the mounting hardware needed to use the factory attachment points without frame modification. Included fasteners are: 3X30 stainless steel button head screw - 2 pcs, 3X14 stainless steel button head screw - 2 pcs, 3MM lock nut - 2 pcs, 3x2 ring - 2 pcs. These stainless fasteners match the common M3 mounting pattern used on TAMIYA tractor truck components.
Fitting is straightforward for those comfortable with RC assembly: remove the original bumper, align the new aluminium bumper to the factory bosses, and fasten with the supplied screws and lock nuts. Use the appropriate hex driver for the supplied button heads and check steering and axle clearance before final tightening. The bumper enhances appearance and provides a durable mounting point for accessories or additional mass.
When considering setup and handling, note the effect of the extra front mass; the aluminium adds stiffness while leaving suspension geometry unchanged when mounted at the stock positions. This part is intended solely for RC model use.
Install this aluminium bumper to improve front-end toughness and scale realism on compatible TAMIYA tractor truck kits, using the provided hardware to fit original mount points.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved
