Transmitter-to-Transmitter DIN Trainer Cable for FF4/6/7/8/9Z & AT8000 Futaba FUAT8000  [FUAT8000]

FUTABA DIN-DIN ROUND-ROUND TRAINER CABLE CORD FOR FF4/6/7/8/9Z AT8000 (W/O PACKING)
Price:
£10.45
Brand:
Futaba
Model:
FUAT8000
Condition:
Brand New
Write a review

Transmitter-to-transmitter DIN trainer cable

The Futaba FUAT8000 is a DIN-to-DIN trainer cable intended for use with FF4/6/7/8/9Z and AT8000 transmitters. Round DIN connectors mate with the standard trainer ports to provide a reliable wired connection for student/instructor setups and workshop checks.

To use, plug each round DIN connector into the trainer port of the relevant transmitter and power both units as directed in their manuals. Note that the cable is designed solely for bridging control signals during training and bench tests, and is not a substitute for main power cabling.

Apply the cable when checking receiver behavior, demonstrating trim adjustments, or confirming transmitter outputs on a workbench. Keep the lead loosely coiled when stored and clean connector faces occasionally to maintain good contact.

Will this cable work with Futaba radios not listed above?

Compatibility is intended for models that use round DIN trainer sockets. If a different Futaba radio has the same DIN trainer port, the cable should function, but always check the radio's connector type first.

Can I link a Futaba transmitter to a third-party radio with this lead?

Only if the third-party radio has a compatible round DIN trainer socket and matching signal wiring. Otherwise an appropriate adapter or different cable will be required.

What maintenance keeps the connectors reliable?

Periodically wipe the connector faces with a clean, dry cloth and store the cable without tight bends. Avoid exposure to moisture and abrasive debris to prevent contact issues.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved