TRAXXAS 1/10 4-TEC Alloy Performance Set TEC2VXLKIT by GPM  [TEC2VXLKIT]

TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT
Price:
£331.52
Brand:
GPM
Model:
TEC2VXLKIT
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"

Performance alloy package for TRAXXAS 4-TEC models

This upgrade package targets TRAXXAS 1/10 4WD GT4 and 4-TEC on-road cars, offering a consolidated set of alloy components that replace weaker stock parts to enhance chassis stiffness. It combines alloy differential housings, aluminium suspension and steering pieces, strengthened CVDs and high speed cooling fans for better thermal control under race conditions.

The kit is aimed at TRAXXAS 4-TEC 2.0 and 3.0 chassis and supports tuning for improved durability and handling rather than altering vehicle layout. Fitting requires standard disassembly of drivetrain and suspension components; verify dimensions and clearance before final tightening and use common RC hand tools for installation.

Packing includes

  • 7075 Alloy Front Differential Housing - 1pcs
  • Alloy 7075 Rear Differential Housing - 1pcs
  • Aluminum 7075 Motor Mount Plate With Heat Sink Fins - 1pcs
  • Aluminum Front C Hubs - 1pcs
  • Aluminum Front Knuckle Arm - 1pcs
  • Aluminum Rear Knuckle Arm - 1pcs
  • 7075 Alloy Servo Mount - 1pcs
  • Aluminum Front Shock Towers - 1pcs
  • Aluminum Rear Shock Towers - 1pcs
  • Aluminum Steering Assembly - 1pcs
  • Aluminum Front Suspension Arms - 1pcs
  • Aluminum Rear Suspension Arms - 1pcs
  • 6061 Alloy Front (58mm)+Rear (60mm) Oil Filled Ultra Shocks - 1pcs
  • Aluminum Servo Saver With Aluminum Steering Link - 1pcs
  • #45 Harden Steel Rear CVD - 1pcs
  • #45 Harden Steel Front CVD - 1pcs
  • 4140 Carbon Steel + 7075 Alloy Front & Rear Complete Differential - 1pcs
  • 6061-T6 Alloy High Speed Cooling Fan 18000 RPM Compatible With 36mm Motor - 1pcs
  • 6061-T6 Alloy ESC High Speed Cooling Fan 20000 RPM (BL-2S: 3383 And Velineon VXL-3S: 3355R) - 1pcs

Compatible Models

  • TRAXXAS 1/10 4WD FORD GT 4-TEC 2.0-83056-4
  • TRAXXAS 1/10 4-TEC 3.0 CORVETTE STINGARY-93054-4
  • TRAXXAS 1/10 4-Tec 3.0 Toyota Supra BL-2s-93164-4
  • TRAXXAS 1/10 4-Tec 2.0 BL-2s Chassis On-Road Cars-83124-4
  • TRAXXAS 1/10 4-Tec 2.0 VXL Chassis On-Road Cars-83076-4

For drivers focused on lap consistency and reduced thermal risk on TRAXXAS 4-TEC based touring cars, this GPM kit groups alloy replacements and cooling enhancements to support reliable track performance.

Is TEC2VXLKIT suitable for both 2.0 and 3.0 4-TEC chassis?

The kit is listed for TRAXXAS 4-TEC 2.0 and 3.0 platforms; perform a trial assembly to ensure every component aligns correctly with your particular chassis revision.

What should I check when fitting the alloy motor mount?

Confirm motor spacing for the 36mm motor fan and ensure the heat sink plate does not interfere with gear or pinion clearance; tighten progressively and recheck alignment.

Can I reuse my existing springs with the new shocks?

The set includes oil filled shocks at specified lengths; you can reuse springs if they match the shock geometry, but adjust rates to suit track conditions.

Do the alloy steering components improve feedback?

Stiffer aluminium steering and knuckles reduce flex under load, sharpening steering response, particularly on high grip surfaces.

What basic tools are recommended for installation?

A set of RC screwdrivers, hex drivers, pliers and threadlocker is recommended; keep spare fasteners on hand as some chassis use different screw lengths.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved