TRAXXAS 1/10 MAXX Front and Rear Aluminium Lower Arms TXMW055F/R by GPM  [TXMW055F/R]

Aftermarket aluminium lower arms for TRAXXAS MAXX

This 14-piece aluminium lower arm set is intended for the 1/10 TRAXXAS MAXX and Wide MAXX monster trucks as a replacement option for front and rear lower arms. The arms are produced from 6061-T6 aluminium and the kit provides the small stainless pins, screws, washers and white Delrin 4mm shims needed to attach to C-hubs and suspension mounts.

Practical setup tips: Delrin collars reduce pivot play and the included rear shims compensate for the larger gap at the rear. The pin plus small screw mounting secures the arms without relying on long-thread engagement, while multiple damper-position holes let you alter damper angle for ride-height and rebound tuning.

The supplied hardware covers normal mounting needs; fit using the stainless pins and the 3x18 and 3x8 screws and check clearance around your motor, ESC and servo before final tightening.

Use these aluminium lower arms when upgrading from plastic parts to recover precise pivot fit and keep suspension tuning flexibility on MAXX platforms.