TRAXXAS 4WD GT4 TEC 2.0 Aluminium Tie Rods GT160 by GPM  [GT160]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160
Price:
£14.27
Brand:
GPM
Model:
GT160
GTIN:
4894538298529
Condition:
Brand New
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"

Low-mass aluminium tie rods for GT4 TEC

This 31 piece tie rod set is an RC-scale steering upgrade for TRAXXAS 4WD GT4 TEC 2.0, produced from 6061 T6 aluminium to reduce weight while reinforcing the front steering geometry.

The set uses counter-clockwise threads for length adjustment so you can fine tune toe and steering response without modifying the stock C-hub geometry. White Delrin collars are supplied to sit in the original C-hub locating holes and ensure consistent positioning during setup.

Install this kit when you want a tougher, lighter replacement for plastic links or when dialing steering sensitivity for closed circuit or road practice. All statements refer to RC-scale components only.

Contents included

  • Stainless Steel Round Head Screws 3x18 - 2pcs
  • Stainless Steel Round Head Screws 3x16 - 2pcs
  • Stainless Steel Round Head Screws 3x14 - 3pcs
  • Stainless Steel Round Head Screws 3x12 - 6pcs
  • Stainless Steel Round Head Screws 3x10 - 4pcs
  • Stainless Steel Flat Head Screws 3x14 - 1pc
  • White Delrin Collar - 4pcs

Specifications

  • Item Aluminum tie rod set
  • Material 6061 T6 aluminum
  • Model Number GT160
  • Compatibility TRAXXAS 4WD GT4 TEC 2.0

Choose this kit to upgrade factory links for a firmer steering feel and repeatable alignment while setting up TRAXXAS 4WD GT4 TEC 2.0 for track or road use.

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0

Will these fit straight onto the stock hubs?

They are manufactured for TRAXXAS 4WD GT4 TEC 2.0 and include Delrin collars to locate in the factory C-hub holes, so they mount using the stock points without permanent changes.

Which way do I turn the adjusters?

The adjusters are counter-clockwise threaded; make small adjustments, then check toe with the car on its wheels and refine as needed after a short run.

Do the collars improve seating?

Yes, the Delrin collars locate into the C-hub holes to hold the tie rod ends in place and reduce lateral movement at the mount points for consistent steering geometry.

Are the fasteners stainless steel?

Yes, the set lists stainless steel round and flat head screws in the stated sizes to secure the rods and collars.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved