TRAXXAS E-REVO Differential Carrier Seal Gasket ER011/P by GPM  [ER011/P]

TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P
Price:
£3.62
Brand:
GPM
Model:
ER011/P
GTIN:
4894538329926
Condition:
Brand New
Write a review
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"

Differential carrier seal gasket

This 2 piece silicone gasket kit is a replacement sealing set for the differential carrier on TRAXXAS E-REVO scale models, supplied as an aftermarket part under part code ER011/P for hobby use.

Silicone offers a useful balance of softness and compression resistance so the gasket stays seated around the carrier joints without taking a permanent set in regular running. A proper seal reduces oil seepage and helps maintain cleaner internal gear and bearing conditions.

Fitment steps: clean mating surfaces of old sealants, place the gasket into the carrier recess, then assemble the halves while applying even screw torque. Avoid over-tightening which may crush the gasket, and ensure the diff rotates freely once assembled.

Packing includes

  • Gasket - 2pcs

Original Name / Part No:

3978

This item is compatible with

  • TRAXXAS E-REVO
  • TRAXXAS Slash 4X4
  • TRAXXAS XO 01
  • TRAXXAS SLASH 4X4 LOW CG

Are these compatible with aftermarket diff cases?

They are designed for TRAXXAS E-REVO carrier recess shapes; compatibility with other aftermarket cases depends on the recess dimensions so check before installing.

Do I need to replace gaskets every service?

Replace if the gasket shows permanent compression, cuts or distortion; otherwise a reusable gasket that remains intact can be refitted.

What torque should I use on the carrier screws?

Use moderate, even torque to clamp the carrier halves; avoid high torque that can overcompress the silicone seal. Tighten screws incrementally in a cross pattern.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved