TRAXXAS JATO 4X4 VXL 7075-T6 Motor Mount Upgrade TJ036 by GPM  [TJ036]

TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036
Price:
£20.71
Brand:
GPM
Model:
TJ036
GTIN:
4894538405835
Condition:
Brand New
Write a review
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"

Dedicated motor mount for Low-CG TRAXXAS JATO 4X4 VXL

The TJ036 motor mount is an aftermarket upgrade made for TRAXXAS JATO 4X4 VXL vehicles that use the Low-CG chassis option. Fabricated from 7075-T6 aluminium, it adds a reinforced bearing seat and fits an oversized 10x19x5mm bearing in place of the stock unit to improve motor plate stability and shaft support under brushless loads.

The item ships pre-assembled with the included fasteners and is engineered to lower motor plate flex and reduce bearing fatigue during extended runs. It does not fit the standard JATO chassis.

Packing includes

  • Motor Mount - 1pcs
  • Oversized Bearing 10x19x5mm - 1pcs
  • Shoulder Screws - 1pcs
  • Grade 12.9 black Round Head Screws 4x10 - 2pcs
  • Grade 12.9 black Round Head Screws 3x10 - 4pcs
  • Grade 12.9 black Flat Head Screws 3x6 - 1pcs
  • Grade 12.9 black Cap Head Screws 3x12 - 1pcs
  • Stainless Steel Gasket 3 x 6 x 0.2 mm - 1pcs
  • M3 Gasket - 1pcs

Original Name / Part No:

7460,7460A

Compatible Models

  • TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
  • TRAXXAS 1/8 JATO 4X4 BL-2S-90154-4
  • TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS SLASH 4X4 LOW-CG-68086-21
  • TRAXXAS 1/10 FORD FIESTA ST RALLY VXL-74276-4
  • TRAXXAS 1/10 FORD FIESTA ST RALLY BL-2S-74154-4
  • TRAXXAS 1/10 RUSTLER 4X4 BL-2s Stadium Trucks-67164-4
  • TRAXXAS 1/10 RUSTLER 4X4 VXL Stadium Trucks-67376-4
  • TRAXXAS 1/10 RUSTLER 4X4 VXL Ultimate Stadium Trucks-67097-4
  • TRAXXAS 1/10 SLASH 4X4 VXL Ultimate Short Course Trucks-68277-4

TJ036 provides a stiffer motor mounting point for Low-CG JATO and compatible 1/10 models, using an oversized bearing to improve longevity under brushless torque; confirm fit and use a medium-strength threadlocker during installation.

Is this mount suitable for non Low-CG JATO builds?

No. The design specifically suits Low-CG chassis kits and will not fit the stock JATO arrangement.

What are the main benefits of TJ036?

Improved motor plate rigidity and stronger shaft support thanks to 7075-T6 construction and the oversized 10x19x5mm bearing.

Does the kit replace specific factory parts?

This aftermarket mount corresponds to original part numbers 7460 and 7460A, as shown in the Original Name / Part No section.

Any recommended pre-run checks?

Check pinion alignment, spin the new bearing by hand to confirm smooth rotation, and apply medium-strength threadlocker to the metal screws.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved