TRAXXAS Latrax Rally 1/18 Direct-Fit 23mm Steel CVD SLTX223 by GPM  [SLTX223]

Direct-fit CVD shaft for Latrax Rally 1/18

The 23mm steel CVD, part number SLTX223, is an aftermarket front and rear driveshaft for TRAXXAS Latrax Rally 1/18 models. It provides a metal alternative to the original polymer shafts while matching the stock dimensions.

The component carries drive between gearbox outputs and wheel hubs as a standard driveline element. Installation follows typical small CVD replacement steps: remove the original shaft, inspect the hub and gearbox contact points, install the steel CVD and tighten using the original hardware. Check adjacent 走珠軸承 and the hub hex for signs of wear during service.

Since the shaft keeps the original geometry it does not change alignment settings, and its steel construction increases wear resistance compared to plastic parts, making it suitable for models exposed to regular running or rougher surfaces.