TRAXXAS MAXX Front C-Hubs 7075 Aluminium Compatible - TXMS019N by GPM  [TXMS019N]

TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N
Price:
£25.94
Brand:
GPM
Model:
TXMS019N
GTIN:
4894538378429
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"

7075 aluminium hubs for precise steering

Aftermarket front C-hubs made to fit the front knuckles on TRAXXAS 1/10 MAXX monster trucks. The 7075 aluminium construction aims to give a durable, lightweight replacement for those tuning their suspension and steering response.

Each hub contains a Delrin collar pressed into the bore to reduce play at the king pin and limit friction. Stainless steel king pins are supplied to improve longevity and resist corrosion in mixed weather running.

Fitting these C-hubs helps to hold knuckle alignment under load so steering inputs are more directly translated to the wheel, simplifying adjustments to caster, toe and Ackermann when optimising handling.

Packing includes

  • Front c-hubs - 2pcs
  • King pin - 4pcs

Original Name / Part No:

Part Location:Front c-hubsProduct major function & usage:Stabilize knuckle arms in order to rotate smoothly.

Compatible Models

  • TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
  • TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

These hubs install directly to the listed TRAXXAS MAXX front knuckle assemblies; use the supplied king pins and confirm steering and suspension travel are free before completing the build.

Do these replace the stock plastic hubs?

Yes, they are a direct replacement for the stock front C-hubs on the listed MAXX kits and use the same mounting points.

Will I need new steering links?

Most stock steering links will fit, but check for clearance and alignment after installation as the hub profile can change link geometry slightly.

What maintenance is recommended?

Regularly inspect the Delrin collars and king pins for wear and re-grease pivot points during scheduled maintenance to preserve smooth operation.

Are these suitable for off-road use?

Yes, the stainless king pins and aluminium hubs are intended for use in off-road and mixed conditions, though routine checks are advised after heavy runs.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved