TRAXXAS MAXX Replacement Aluminium Lower Arms for precise damper mounting TXMW055FR TXMW055F by GPM  [TXMW055FR]

Replacement lower arms for improved pivot precision

These aluminium lower arms are an RC-scale replacement part designed for the TRAXXAS 1/10 4WD MAXX with WideMaxx layout. They support c-hubs and lower shock mounts, creating a robust connection between suspension members and chassis without altering basic suspension geometry.

Made from 6061-T6 aluminium, the arms yield a firmer mounting surface compared to standard plastic parts while maintaining a reasonable weight. Delrin collars are fitted at pivot points to minimise play and focus loads onto the metal pivots; white Delrin shims are provided for the rear arms where larger clearances are common. The fastening approach uses a locating pin plus a small screw rather than a long threaded insert to lower the likelihood of thread damage during servicing. Multiple damper mounting holes are included so you can make fine adjustments to shock angle and ride height.

Fitment guidance: place the supplied stainless pins and washers into the arm pivots, ensure Delrin collars sit flush before final tightening, and only apply the rear shims when needed to remove lateral movement. Double-check damper hole alignment with your current setup to preserve designed handling characteristics.

A straightforward aftermarket option to reduce pivot play and secure consistent damper mounting on TRAXXAS MAXX vehicles; use the included hardware and shims to arrive at the correct fit.