TRAXXAS MAXX Suspension Screw Pin Set TXMSACC/12 - Stainless Front and Rear Kit by GPM  [TXMSACC/12]

TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12
Price:
£20.00
Brand:
GPM
Model:
TXMSACC/12
GTIN:
4894538329285
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"

Stainless suspension screw pins, 12-piece set

This 12-piece stainless steel suspension screw pin set is produced for TRAXXAS MAXX monster truck assemblies and is intended as direct replacements for the original arm mounting positions on the model.

The set provides three lengths to suit the various arm locations: short outer screws for lower arms, medium inner screws for lower arms, and long outer screws for upper arms. Each pin features an internal hex recess so you can tighten them with a hex driver for a secure clamp. Choosing stainless steel reduces the risk of corrosion compared with plated or mild-steel fasteners, and the internal hex helps maintain clamping under the vibration experienced in monster truck use.

Note: pins are suitable for original arms only and function as an RC-scale maintenance and setup accessory rather than a part for altering arm geometry.

Specifications

  • Item Front and rear suspension screw pin set
  • Material Stainless steel
  • Model Number TXMSACC/12
  • Contents Short outer screws for lower arms - 4 pcs, Medium inner screws for lower arms - 4 pcs, Long outer screws for upper arms - 4 pcs
  • Compatibility Suitable for original arms only

Use these stainless pins to replace worn or rusty stock pins and to improve reliability of suspension mountings; always confirm correct lengths and thread engagement and use the correct hex driver to avoid damaging the internal socket.

This item is compatible with

  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4
  • MAXX W/WIDEMAXX MONSTER TRUCK-89086-4

Do these pins require special tools?

You need an internal hex driver that matches the socket size; a good quality driver reduces the risk of rounding the recess during installation.

Are replacement pins easy to source in different sizes?

This set supplies the three lengths used by the stock arms; if you need different sizes for modified arms you should measure and source pins that match the required diameter and length.

Will stainless steel seize in aluminium components?

Stainless-to-aluminium contact can gall in some conditions; use light lubrication on threads and inspect periodically to prevent seizing.

Can I use threadlocker with these pins?

A small amount of medium-strength threadlocker can be used for high-vibration duties, but ensure you can still remove the pins for maintenance and choose a removable-grade product.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved