TRAXXAS MINI XRT VXL 3S Rear Upper Link Arms 7075 Alloy - XRTM057 by GPM  [XRTM057]

Rear upper link arm in 7075 aluminium

This 7075 aluminium rear upper suspension arm is produced to suit the TRAXXAS MINI XRT VXL 3S and serves as a direct metal upgrade to the factory plastic link. The machined alloy arm helps maintain axle carrier alignment under load and lowers flex where the rear upper link attaches to the hub.

Fitting is conventional: slot the rear upper arm into the mount, insert the 34.2mm outer arm pin through the arm and hub carrier, then secure with the supplied M3 lock nut. Both arms and the matching pins and lock nuts are included in the kit so additional hardware is not required for the models listed.

Designed as an RC-scale chassis upgrade, this arm aims to deliver more consistent rear behaviour during acceleration and cornering and can be combined with link or shock tuning to alter rear roll characteristics.

Opt for these aluminium arms when you need a firmer rear mount to limit hub carrier movement under load, while keeping the swap simple with the supplied pins and lock nuts.