TRAXXAS Revo 85mm Adjustable Alloy Spring Dampers TRV085N/2 by GPM  [TRV085N/2]

TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2
Price:
£38.58
Brand:
GPM
Model:
TRV085N/2
GTIN:
4894538207354
Condition:
Brand New
Write a review
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"

Overview of Revo adjustable dampers

The TRV085N/2 kit contains front and rear adjustable spring dampers purpose-made for TRAXXAS Revo scale chassis, sold as a 2prs pack. Each damper is 85mm long and made from alloy, fitted with alloy ball ends to replace the standard plastic fittings for a more durable mount.

These parts are intended for RC use only and must not be fitted to full-size vehicles. They mount to the usual Revo shock positions, using the stock shock towers and lower mounts. Retain your existing springs and caps unless you fit compatible aftermarket springs; only standard hobby tools are required to perform the swap.

These adjustable spring dampers enable adjustments to spring preload and ride height while improving the ball-end attachment over polymer originals. Further tuning is achieved by selecting different spring rates or compatible shock components.

Specifications

  • Item: Alloy front/rear adjustable spring dampers 85mm with alloy ball ends, 2prs set
  • Material: Alloy
  • Model Number: TRV085N/2
  • Compatibility: TRAXXAS Revo

A practical upgrade when replacing fragile plastic shock ends or when seeking modest improvements in durability and basic tuning for TRAXXAS Revo models; fits stock mounting hardware and supports standard spring setups.

This item is compatible with

  • Traxxas REVO
  • TRAXXAS E-REVO

Are these a direct replacement for stock shocks?

They are intended to replace stock shocks where the Revo uses 85mm lengths and standard mount points; verify your chassis dimensions before ordering.

Do I need new hardware to fit them?

They attach to existing ball studs and mount points; use the same mounting hardware unless your studs are worn, in which case replace with compatible hardware.

Will they work with oil-filled cartridges?

These are adjustable spring dampers and focus on spring preload and mounting durability; for damping control use cartridges and oil compatible with your chosen shock setup.

How do alloy ball ends help?

Alloy ball ends reduce wear versus plastic fittings and give a firmer, more consistent mounting point that helps maintain setup under regular RC use.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved