TRAXXAS Revo Completed Alloy Servo Mounts Front & Rear TRV024 by GPM  [TRV024]

TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024
Price:
£11.02
Brand:
GPM
Model:
TRV024
GTIN:
4894538204995
Condition:
Brand New
Write a review
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"
alt="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024" title="TRAXXAS Revo /Revo 3.3 Alloy Front& Rear Completed Servo Mount With Screws - 2prs set - GPM TRV024"

Completed alloy servo mount set for Revo

This GPM TRV024 assembly includes front and rear alloy servo mounts delivered as finished units with mounting screws, designed specifically for hobby TRAXXAS Revo chassis. Replacing the standard plastic brackets, the alloy parts increase mounting rigidity and help retain accurate servo alignment under load for more predictable steering.

Professional modellers will find installation straightforward: the completed mounts accept common servo footprints and the supplied screws enable a direct swap with original parts. During assembly, check servo horn clearance and pushrod geometry, then operate steering through full travel to confirm there is no binding at suspension limits.

As an aftermarket hop-up, these alloy mounts improve the mechanical interface between the servo and chassis without changing servo torque or speed, making them a sensible choice when upgrading servos or tightening steering for competitive running.

Compatible Models

  • TRAXXAS Revo
  • Revo 3.3

Do these mounts use the stock mounting points?

They are intended to fit the stock mounting points using the supplied screws, but confirm alignment and servo footprint before finishing the install.

Will the alloy mounts require different servos?

No, the mounts do not require alternate servos; they simply reduce flex and keep the servo better positioned under load.

Best practice to prevent steering issues?

Set the servo horn straight, adjust pushrod length with the suspension at both extremes, then confirm free movement across full steering range prior to locking bolts.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved