Traxxas Revo Front Shock Tower RE-009/S Replacement by 3Racing  [RE-009/S]

Front shock tower notes

This front shock tower is an RC replacement part meant to be used with Traxxas Revo front suspension assemblies. The silver finish complements many chassis builds while performing the primary role of securing the tops of the front shocks and feeding loads into the chassis.

As a fixed plate the tower determines shock geometry and has a direct effect on suspension behaviour under impact and during cornering. It is part of the structural baseline when adjusting shock length, spring rate, or shock mounting position to alter ride characteristics.

Installation notes: attach this tower to the front section of the Revo chassis to receive the upper shock ends. Keep mounting hardware accessible, inspect shock shaft alignment after installation, and check for clearance against steering and linkage parts before tightening fully.

• Purpose: provides a consistent attachment point for front shocks and a platform for suspension tuning.
• Workshop advice: remove any flashing or overspray that might catch on shock eyelets during fitment.