TRAXXAS Revo Right Front Upper Arm Upgrade Alloy - TRV054RS by GPM  [TRV054RS]

TRAXXAS Revo /Revo 3.3 Alloy Front Upper Arm (Sandwich Design With Screws+Pins)-1pc set (For Right Side) - GPM TRV054RS
Price:
£8.76
Brand:
GPM
Model:
TRV054RS
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Right front upper arm in alloy for TRAXXAS Revo

This single right-side front upper arm is created for TRAXXAS Revo and Revo 3.3 platforms, using an alloy sandwich construction and supplied with the mounting screws and pins specified in the product title. It is ready for a direct swap into compatible suspension assemblies.

The part replaces the stock right-side upper link to recover suspension geometry and reduce flex versus plastic arms. The stiffer mount keeps steering knuckle and shock attachments aligned under load, which helps maintain predictable handling during setup changes.

Fitting guidance: assemble with the provided pins and hex screws, verify pin diameter and hole alignment first, use the correct hex driver to tighten hardware uniformly, and ensure steering and shock end clearance after installation. Re-torque fasteners after an initial short run.

Does this replace the OEM right upper arm?

Yes, it is intended as a right-side front upper arm replacement for TRAXXAS Revo and Revo 3.3; check mounting points on your chassis to confirm compatibility.

What should I check when I receive it?

Inspect that the sandwich clamp screws and mounting pins referenced in the title are included and free from damage, and verify fitment before final torque.

Any maintenance after fitting?

After installation, run the vehicle briefly then re-torque all hardware and confirm there is no binding between the arm, steering linkage, or shock ends.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved