TRAXXAS Slash 4X4 Front Tie Rods 7075 Aluminium With Stabiliser SLA049LCGN by GPM  [SLA049LCGN]

TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN
Price:
£22.11
Brand:
GPM
Model:
SLA049LCGN
GTIN:
4894538386806
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN" title="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN"
alt="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN" title="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN"
alt="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN" title="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN"
alt="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN" title="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN"
alt="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN" title="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN"
alt="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN" title="TRAXXAS SLASH 4X4 7075 Alloy Front Tie Rods With Stabilizer For C Hub - GPM SLA049LCGN"

7075 aluminium steering hop-up for Slash 4X4

This front tie rod kit is created to replace the stock steering linkage on TRAXXAS Slash 4X4 models while retaining the standard C-hub and linkage geometry. Fabricated from 7075 aluminium, the components aim to increase tensile strength and reduce unnecessary weight relative to softer alloys.

An integrated stabiliser and a triangular reinforcement add lateral support to the steering knuckle without locking out suspension travel. The tie rod is length adjustable and includes a counter-clockwise threaded end fitting to help secure the rod ends and allow fine toe adjustments.

Recommended mounting points are the C-hub tops, front gearbox side mounts and the central stabiliser interface on the chassis. This aftermarket part helps deliver steadier steering characteristics during technical off-road driving and tuning sessions.

Packing includes

  • Tie Rod Holder - 2pcs
  • Stabilizer - 1pcs
  • Grade 12.9 black Flat Head Screw 4x25 - 2pcs
  • Grade 12.9 black Round Head Screw 3x14 - 4pcs
  • Grade 12.9 black Round Head Screw 3x16 - 4pcs

Compatible Models

  • TRAXXAS 1/10 SLASH 4X4 LCG-68086-21

Install the 7075 aluminium tie rods and stabiliser to tighten steering feedback and enable precise toe control on Slash 4X4 builds; verify thread direction and torque settings when fitting.

Does the kit change steering geometry?

No, the design preserves factory geometry by mounting at the original C-hub and gearbox points, so steering geometry remains consistent with standard setups.

What thread direction should I expect on the rod ends?

One end uses a counter-clockwise thread to reduce the risk of loosening under typical steering loads; confirm which end is which before locking down the adjustment.

Will the stabiliser prevent all steering flex?

The stabiliser and triangular reinforcement lower lateral flex at the knuckle but will not eliminate all movement; they improve consistency rather than creating a fully rigid steering system.

Are these parts serviceable if damaged?

Yes, individual components such as the tie rod holder and stabiliser can be replaced if damaged; keep the original screw sizes to match replacements.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved