TRAXXAS Slash 4x4 Rear CVD Harden Steel Upgrade SSLA1277RHST 8pc set by GPM  [SSLA1277RHST]

TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST
Price:
£25.07
Brand:
GPM
Model:
SSLA1277RHST
GTIN:
4894538322477
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"

Rear drive details

The SSLA1277RHST 8-piece rear CVD drive shaft kit is offered as a replacement for the TRAXXAS 1/10 Slash 4x4 rear axle. Produced in Harden Steel #45, the CVD arrangement maintains smooth rotation while retractable segments preserve suspension travel and clearance. The included spring steel wheel hex stabiliser helps cut play during acceleration and corner work, aimed at drivers wanting a robust rear drivetrain for electric Slash 4x4 models.

Installation notes: fit at the rear axle location with the supplied screw pins and O-rings. A basic rear diff and axle housing strip is necessary; double-check hex retention and pin seating before first use to ensure safe running.

Packing includes

  • Item - 8pcs

Original Name / Part No:

6850X+6828X+6854X

Specifications

  • Item: TRAXXAS 1/10 Slash 4x4 Rear CVD Drive Shaft, 8 pcs set
  • Material: Harden Steel #45
  • Model Number: SSLA1277RHST
  • Compatibility: TRAXXAS 1/10 Slash 4x4 (rear axle)

SSLA1277RHST is a straightforward steel retrofit that improves rear-end reliability and reduces drivetrain play on 1/10 Slash 4x4 cars; check alignment and fastener torque when fitting.

This item is compatible with

  • TRAXXAS Slash 4X4

Is this a direct replacement for the stock shafts?

Yes, the set is intended as a direct-fit replacement for the Slash 4x4 rear axle components, though standard disassembly of the rear diff and axle housing is needed for installation.

Will the hex stabiliser stop wheel wobble?

The spring steel stabiliser reduces hex play by holding the wheel hex more securely under load, which helps reduce perceived wobble during hard acceleration and cornering.

Should I change my maintenance routine?

Inspect the shafts and hex retention periodically, keep the diff lubricated, and check fastener torque after a few running sessions to maintain reliability.

What advantage does Harden Steel #45 give?

Harden Steel #45 offers higher wear resistance and dimensional stability under load compared with common stock alloys, improving long-term drivetrain integrity.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved