TRAXXAS T-Maxx 1/10 100mm Shock Spring 1.5mm - TMX13100/SP4 by GPM  [TMX13100/SP4]

100mm shock spring, 1.5mm wire

Made for TRAXXAS 1/10 T-Maxx 100mm shock bodies, this aftermarket spring set is supplied as 2 pcs and is intended to alter spring rate and rebound without modifying the shock internals.

Apply these springs when you need a simple mechanical change to handling: raise spring rate for less dive and firmer wheel control on landings, or soften the rate to help grip on rough or uneven surfaces. Make measured adjustments and run short tests to evaluate results.

Installation is routine on common T-Maxx dampers: remove the shock, compress the end cap, replace the springs and reassemble. Combine spring changes with appropriate oil weight and preload tweaks to achieve the preferred damping response. Ensure the springs seat fully on the retainers and check suspension travel after fitting.